Tutorials Qblox Backend

Warning

The quantify_scheduler.backends.qblox_backend is still under development. Breaking changes at this stage are not excluded.

Introduction

quantify_scheduler provides a modular system: qblox_backend, that abstracts the full experimental setup using Qblox hardware for experiments in a modern and automated fashion.

Functionality included in this backend:

  • Full compilation of the schedule to a program for the sequencer.

  • Waveform generation and modulation, in a parameterized fashion as supported by Qblox hardware.

  • Built-in version handling to ensure the backend works correctly with the installed driver version.

  • Automatic handling of the hardware constraints such as output voltage ranges and sampling rates.

  • Calculation of the optimal hardware settings for execution of the provided schedule using the Instrument Coordinator.

  • Real mode, which allows to address the individual outputs separately rather than using IQ signals.

  • Full support of frequency multiplexing.

  • Automatic calculation of the required parameters for external local oscillators.

  • Correction of the mixer errors using specified correction parameters.

  • Flexible configuration via JSON data structures.

No special configuration is required to use this backend. Simply specify quantify_scheduler.backends.qblox_backend.hardware_compile in the hardware configuration to use this backend or call the function directly. Please see Usage of the backend for information on how to set this up. After a schedule is compiled into a program, uploading to the hardware can be done using the usual qblox-instruments drivers. Installation of these drivers is done through

$ pip install qblox-instruments

Please visit the Qblox instruments documentation for more information.

Supported Instruments

  • ✅ QCM

  • ✅ QRM

  • ✅ QCM-RF

  • ✅ QRM-RF

  • ✅ Cluster

  • ⬜️ SPI

  • ✅ Downconverter